Skip header
 

Assigning the machine's IP address manually

Important

  • The IP address assigned to the machine must not be used by any other device on the same network.

1Press any menu key.

image

2Press the [Up arrow key][Down arrow key] keys to select [Network Settings], and then press the [OK] key.

3If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.

4Press the [Up arrow key][Down arrow key] keys to select [IP Configuration], and then press the [OK] key.

5Press the [Up arrow key][Down arrow key] keys to select [DHCP Activated], and then press the [OK] key.

6Press the [Up arrow key][Down arrow key] keys to select [Off], and then press the [OK] key.

The new setting is displayed with an “*” symbol, indicating that the setting has been changed.

7Confirm the setting, and then press the [image] key.

image

8Press the [Up arrow key][Down arrow key] keys to select [IP Address], and then press the [OK] key.

9Enter the machine's IP address using the number keys, and then press the [OK] key.

Press the [Up arrow key][Down arrow key] keys to move between fields.

10Confirm the setting, and then press the [image] key.

11Press the [Up arrow key][Down arrow key] keys to select [Subnet Mask], and then press the [OK] key.

The current subnet mask is shown.

12If the subnet mask shown is incorrect, enter the new subnet mask using the number keys, and then press the [OK] key.

Press the [Up arrow key][Down arrow key] keys to move between fields.

13Confirm the setting, and then press the [image] key.

14Press the [Up arrow key][Down arrow key] keys to select [Gateway], and then press the [OK] key.

The current gateway address is shown.

15If necessary, enter a new gateway address using the number keys, and then press the [OK] key.

Press the [Up arrow key][Down arrow key] keys to move between fields.

16Confirm the setting, and then press the [image] key.

17Press the [Clear/Stop] key to return to the initial screen.

18If you are requested to reboot the machine, turn off the machine, and then turn it back on.

19Print the configuration page to confirm the setting.

The IP address setting will appear under “TCP/IP” on the configuration page.

Note

  • You can press the [image] key to exit to the previous level of the menu tree.

  • A password for accessing the [Network Settings] menu can be specified in [Admin Menu Lock].

  • If your network environment requires a specific transmission speed that is not automatically detected, set the transmission speed in [LINK Setting] under [Network Settings].

  • When [DHCP Activated] is enabled, manually configured IP address settings are not used.

Reference