Removing Jammed Paper
PreviousNext
Remove the jammed paper or originals by following the procedures stated in the animation that appears on the screen.
If the error message "Paper Misfeed (C)" is displayed, pay attention to the following:
When removing jammed paper, you can touch only those areas explicitly indicated in the manual.
Do not remove the fusing unit. Doing so will result in loss of print quality.
To remove paper that has not been fed into the fixing section correctly, remove the jammed paper through the underside of the fusing unit. If the jammed paper cannot be removed through the underside of the fusing unit, remove it from the top.
Press the key of the section from where you want to remove the jammed paper.
After each step is complete, press [Next]. To go back to the previous step, press [Previous].
When all jammed paper is removed, restore the machine to the original state.
