Skip header
 

Top Page > Using the Fax Function > Sending a Fax > Specifying the Scan Settings > Specifying the resolution

Specifying the resolution

This section describes how to specify the resolution for scanning the original for the current job.

There are three resolution settings:

Standard

Select this when the original is a printed or typewritten document with normal-sized characters.

Fine

Select this when the original is a document with small print.

Photo

Select this when the original contains images such as photographs or shaded drawings.

1Press the [Image Quality] key.

image

2Press the [Image Quality] key or [Up arrow key][Down arrow key] keys to select the desired resolution setting, and then press the [OK] key.

Note

  • Press the [image] key or [Clear/Stop] key to discard the current change and return to the initial screen.

  • You can change the [Resolution] setting under [Fax Settings] to always scan with a specific resolution level.

  • Temporary job settings are cleared in the following cases:

    • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.

    • When the [Clear/Stop] key is pressed while the initial screen is displayed.

    • When the machine's mode is changed.

    • When the power is turned off.

    • When the machine's default for the same setting is changed.

Reference