Skip header
 

Basic Operation for Sending Scanned Files

This section describes the basic operation for scanning using the control panel. The scanned file is sent via E-mail, to an FTP server, or a computer, depending on the specified destination.

Important

  • The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on the exposure glass.

1Press the [Scanner] key.

image

2Place the original on the exposure glass or in the ADF.

If necessary, configure advanced scan settings.

3Press the [Address book] key.

You can press the [Up arrow key][Down arrow key] keys to scroll the address book.

image

4Search for the desired destination by entering the destination name using the number keys, and then press the [OK] key.

The screen changes to show the names that match the characters you enter.

5Press the [B&W Start] key or the [Color Start] key.

image

To scan in black and white, press the [B&W Start] key.

To scan in color, press the [Color Start] key.

Depending on the machine's settings, you may be prompted to place another original on the exposure glass. In this case, proceed to the next step.

6If you have more originals to scan, place the next original on the exposure glass, and then press [1]. Repeat this step until all originals are scanned.

7When all originals have been scanned, press [2] to start sending the scanned file.

Note

  • To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files are discarded.

  • You can also specify a destination using the One Touch buttons or [Pause/Redial] key.

  • If the [Limitless Scan] setting under [Scan Settings] is enabled, you can place originals on the exposure glass repeatedly in a single scan procedure.

  • If the [Multi Page in A Document] setting under [Scan Settings] is enabled, you can scan multiple pages to create a single PDF or TIFF file containing all pages. However, if the file format is JPEG, a single-page file will be created for every page scanned.

  • If paper is jammed in the ADF, the scan file is discarded. In this case, scan the entire originals again. To remove paper jams in the ADF, see Removing Scanning Jams.

Reference