Handbücher
Inhalt
Zurück
Weiter
| | | |
| |||
| |||
| | | |
| HandbücherInhaltZurückWeiter | | |
Verwenden Sie den folgenden Befehl, um die Einstellungen der Netzwerkkarte anzuzeigen.
telnet: Verwenden Sie den Befehl "show".
Element |
Beschreibung |
|||
|---|---|---|---|---|
Common |
||||
Modus |
||||
Protokoll Nach oben/nach unten |
Protokolleinstellungen |
|||
AppleTalk |
||||
IPv4 |
||||
IPv6 |
||||
IPsec |
||||
NetWare |
||||
SMB |
||||
Gerät Nach oben/nach unten |
Geräteeinstellungen |
|||
Parallel |
||||
USB |
||||
Ethernet interface |
||||
Priorität Syslog |
||||
NVRAM-Version |
||||
Device name |
||||
Kommentar |
||||
Ort |
||||
Kontakt |
||||
Soft-Schalter |
||||
AppleTalk |
AppleTalk-Einstellungen |
|||
Modus |
||||
Net |
||||
Objekt |
||||
Typ |
||||
Zone |
||||
TCP/IP |
TCP/IP-Einstellungen |
|||
Mode(IPv4) |
||||
Mode(IPv6) |
||||
ftp |
||||
lpr |
||||
rsh |
||||
telnet |
||||
diprint |
||||
web |
||||
http |
||||
ftpc |
||||
snmp |
||||
ipp |
||||
autonet |
||||
bonjour |
||||
ssl |
||||
nrs |
||||
rfu |
||||
nbt |
||||
ssdp |
||||
ssh |
||||
sftp |
||||
WS-Device |
||||
WS-Print |
||||
ipds |
||||
rhpp |
||||
IPv4 |
||||
DHCP |
||||
Adresse |
||||
Netmask |
||||
Broadcast |
||||
Gateway |
||||
IPv6 |
||||
Statuslos |
||||
Manuell |
||||
Gateway |
||||
EncapType |
||||
DHCPv6-lite |
||||
DUID |
||||
DHCPv6 option lifetime |
||||
IPsec |
||||
Manual Mode |
||||
Excluded Protocol |
||||
https |
||||
dns |
||||
dhcp |
||||
wins |
||||
EncapType |
||||
Hostname |
||||
DNS-Domain |
||||
Zugriffskontrolle |
Zugriffskontrolleinstellungen |
|||
IPv4 |
||||
AccessEntry[X] |
X kann zwischen 1 und 5 festgelegt werden. |
|||
IPv6 |
||||
AccessEntry[X] |
X kann zwischen 1 und 5 festgelegt werden. |
|||
SNTP Server |
Zeiteinstellungen |
|||
Zeitzone |
||||
SNTP Server polling time |
||||
SYSLOG-Server |
Websys-Einstellungen |
|||
Home page URL1 |
||||
Home page linkname1 |
||||
Home page URL2 |
||||
Home page linkname2 |
||||
URL der Hilfeseite |
||||
IPDS Port |
||||
IPDS timeout |
||||
RHPP Port |
||||
RHPP timeout |
||||
NetWare |
||||
EncapType |
||||
RPRINTER number |
||||
Druckservername |
||||
Dateiservername |
||||
Kontextname |
||||
Umsch. |
||||
Mode |
||||
NDS/Bindery |
||||
Packet negotiation |
||||
Login-Modus |
||||
Print job timeout |
||||
Protokoll |
||||
SAP-Intervallzeit |
||||
NDS-Baumname |
||||
Übertragungsprotokoll |
||||
SMB |
SMB-Einstellungen |
|||
Schalter |
||||
Modus |
||||
Direktdruck |
||||
Benachrichtigung |
||||
Arbeitsgruppenname |
||||
Computername |
||||
Kommentar |
||||
Freigabename [1] |
||||
Protokoll |
||||
Wireless LAN |
Wireless-LAN-Einstellungen |
|||
Hostname |
||||
Kommunikationsmodus |
||||
SSID |
||||
Kanal |
||||
Sicherheit |
||||
WEP-Authentifizierung |
||||
WEP-Verschlüsselungscode |
||||
WEP Encryption key number [X] |
X kann zwischen 1 und 4 festgelegt werden. |
|||
WPA-Verschlüsselung |
||||
WPA-Authentifizierung |
||||
Pre-Shared-Code |
||||
Anwendername |
||||
Domain-Name |
||||
EAP-Typ |
||||
Passwort |
||||
Phase 2 Anwendername |
||||
Phase 2 Verfahren TTLS |
||||
Phase 2 Verfahren PEAP |
||||
Server cert. |
||||
IntermediateCA |
||||
Server-ID |
||||
Sub domain |
||||
MIC check |
||||
DNS |
DNS-Einstellungen |
|||
IPv4 |
||||
Server[X] |
X kann zwischen 1 und 3 festgelegt werden. |
|||
Selected IPv4 DNS Server |
||||
IPv6 |
||||
Server[X] |
X kann zwischen 1 und 3 festgelegt werden. |
|||
Selected IPv6 DNS Server |
||||
Resolver Protocol |
||||
Domain-Name |
||||
ether |
||||
wlan |
||||
DDNS |
||||
ether |
||||
wlan |
||||
WINS |
WINS-Einstellungen |
|||
ether |
||||
Primärer WINS |
||||
Sekundärer WINS |
||||
wlan |
||||
Primärer WINS |
||||
Sekundärer WINS |
||||
SSDP |
SSDP-Einstellungen |
|||
UUID |
||||
Profil |
||||
TTL |
||||
UPnP |
UPnP-Einstellungen |
|||
URL |
||||
Bonjour |
Bonjour (Redezvous)-Einstellungen |
|||
Computername (cname) |
||||
Lokaler Hostname (ether) |
||||
Lokaler Hostname (wlan) |
||||
Ort |
||||
Priorität (diprint) |
||||
Priorität (lpr) |
||||
Priorität (ipp) |
||||
IP TTL |
||||
LinkLocal Route for MultiI/F |
||||
IPP Port |
||||
SNMP |
SNMP-Einstellungen |
|||
SNMPv1v2 |
||||
SNMPv3 |
||||
Protokoll |
||||
v1Trap |
||||
v2Trap |
||||
v3Trap |
||||
SNMPv1v2-Remote-Einstellung |
||||
SNMPv3 Privacy |
||||
ssh |
ssh-Einstellungen |
|||
Komprimierung |
||||
Anschluss |
||||
TimeOut |
||||
Login TimeOut |
||||
AuthFree |
Authfree-Einstellungen |
|||
IPv4 |
||||
|
AuthFreeEntry[X] |
X kann zwischen 1 und 5 festgelegt werden. |
||
IPv6 |
||||
AuthFreeEntry[X] |
X kann zwischen 1 und 5 festgelegt werden. |
|||
Parallel |
||||
USB |
||||
LPR |
||||
lprm check host |
||||
lpr prnerr chk |
||||
Zertifilkat |
||||
Verifizierung |
||||
WS-MFP |
||||
Network Device Name |
||||
Comments |
||||
Position |
||||
Presentation URL |
||||
WS-Device TCP Port |
||||
WS-Printer TCP Port |
||||
WS-Printer Job Timeout |
||||
MetadataVersion |
||||
UUID |
||||
Shell-Modus |
Modus des Fernwartungstools |
|||
 |
 | Copyright (C) 2008 |
