The MCERICOH automatically modify the Windows system files so that
MCERICOH can use the default memory window, D000-D3FF, to access the PC
card controller.
If you do not receive this error message, you can use MCERICOH without
changing the memory window setting from the default.
If you receive this error message at application startup, you need
to manually configure the memory window settings referring to the following
link.
ERR-001: Memory Window,
D000-D3FF, already in use (Windows 95/98)
1. Ensure that no PC card is installed in your computer. Do not start
MCERICOH at this time.
2. Open Control Panel and double-click on the "PC Card (PCMCIA)" icon.
5. Repeat steps 3 and 4 for all the physical slots available.
6. Decide which slot you will use for programming the flash memory
cards. If your choice is slot 1, you do not need to change the MCERICOH
configuration. Otherwise, go to the next step.
7. Start MCERICOH with no PC cards in the slots.
8. Select [Setup] - [Slot Priority & Card Detection].
9. Change the default slot setting to the slot that you wish to use,
then close the dialog.
10. Close MCERICOH and restart it.
11. Test the read/write functions using the slot you have selected.