Skip header
 

Top Page > Operating Instructions > Configuring and Managing the Printer > Configuration > Wireless LAN Configuration > Setting the SSID

Setting the SSID

When [Communication Mode] is set to [Infrastructure Mode] or [802.11 Ad-hoc Mode], you must specify the Service Set Identifier (SSID) of the wireless access point that the printer will connect to for network access.

1In the [Wireless LAN] menu, press [SSID Setting].

2Press [Enter SSID].

3Enter the characters, and then press [OK].

Ask your network administrator for the SSID to use.

The characters that can be used are ASCII 0 × 20-0 × 7e (32 bytes).

4Press the [User Tools] key.

5Print a configuration page to confirm the settings.

Note

  • For details about printing the configuration page, see Test Printing.

  • The SSID can also be set using Web Image Monitor. For details, see Web Image Monitor Help.

PreviousNext