Skip header
 

Top Page > Operating Instructions > Printing > Preparing for Sending a Print Job > Specifying the Behavior for when an Error Occurs > Canceling print jobs with errors automatically

Canceling print jobs with errors automatically

When an error occurs, the printer cancels the print job with an error and the jobs received before the error occurs.

Important

  • This function is effective when printing using the following printer languages: PCL, PostScript 3, and PDF.

  • This function is not effective when:

    • Printing using RHPP or RGate

    • Spool printing is enabled

    • Printing using a protocol that cannot detect the end of job, such as via USB connection

    • Errors occur while printing from memory storage devices or using Extended Features, or while printing a stored document or a list

1Press [System] on the [Printer Features] screen.

For details about how to access the [Printer Features] screen, see Displaying the Printer Configuration Screens Using the Control Panel.

2Press [Down arrow key] repeatedly until [Auto Cancel for Print Job(s) on Error] appears.

3Press [Auto Cancel for Print Job(s) on Error].

4Press [On].

5Press [OK].

6Press the [User Tools] key.

Note

  • For details about the items that can be configured, see System.

PreviousNext