Previous
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the paper is placed.
Settings for User Tools
Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer Features menu, and then place the paper as shown below.
For details about the letterhead settings, see System
.
Paper orientation
The meanings of the icons are as follows:
Icon |
Meaning |
|---|---|
|
Place or load paper printed side face up. |
|
Place or load paper printed side face down. |
Print side |
Tray 3 (LCT) |
Trays 1–4 |
Large capacity tray (LCT) |
Bypass tray |
|---|---|---|---|---|
One-sided |
|
|
|
|
Two-sided |
|
|
|
|
To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you must specify [Letterhead] as the paper type in the printer driver's settings.
If a print job is changed partway through printing from one-sided to two-sided printing, one-sided output after the first copy may be printed facing a different direction. To ensure all paper is output facing the same direction, specify different input trays for one-sided and two-sided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing.
For details about how to make two-sided prints, see Printing on Both Sides of Sheets
.
