Guide to Components (mainly Asia)

Front and right view

1. ADF

   Lower the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

   Place originals face down here.

3. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel.

4. Front cover

   Open to access the inside of the machine.

5. Paper tray

   Load paper here.

6. Paper tray unit (Tray 2 and Tray 3)

   Load paper here.

7. Ventilation holes

   Prevent overheating.

8. Main power switch

   To operate the machine, the main power switch must be on. If it is off, turn the switch on.

9. Bypass tray

   Use to copy or print on OHP transparencies and label paper (adhesive labels).

10. Extender

    Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.

11. Paper guides

    When loading paper in the bypass tray, align the paper guides flush against the paper.

12. Lower right cover

    Open this cover when a paper jam occurs.

13. Right cover

    Open this cover to remove jammed paper fed from the paper tray.

Front and left view

1. Internal tray guide

   Open out and raise the end fence to support large paper.

2. Extenders

   Raise these extenders to support large paper.

3. Internal tray

   Copied/printed paper and fax messages are delivered here.

Rear and left view

1. Ventilation holes

   Prevent overheating.