Network Settings Required to Use Scan to Folder Function
This section lists the network settings required for sending files.
For details about how to specify the settings, see Interface Settings
and File Transfer.
These settings should be made by the administrator, or with the advice of the administrator.
Menu |
User Tool |
Setting Requirements |
|---|---|---|
Interface Settings/Network |
Machine IPv4 Address |
Necessary |
Interface Settings/Network |
IPv4 Gateway Address |
Necessary |
Interface Settings/Network |
Machine IPv6 Address |
As required |
Interface Settings/Network |
IPv6 Gateway Address |
As required |
Interface Settings/Network |
IPv6 Stateless Address Autoconfiguration |
As required |
Interface Settings/Network |
DNS Configuration |
As required |
Interface Settings/Network |
DDNS Configuration |
As required |
Interface Settings/Network |
IPsec |
As required |
Interface Settings/Network |
Domain Name |
As required |
Interface Settings/Network |
WINS Configuration |
As required |
Interface Settings/Network |
Effective Protocol |
Necessary |
Interface Settings/Network |
Ethernet Speed |
As required |
Interface Settings/Network |
Permit SNMPv3 Communication |
As required |
Interface Settings/Network |
Permit SSL / TLS Communication |
As required |
Interface Settings/Network |
Host Name |
As required |
Interface Settings/Network |
IEEE 802.1X Authentication for Ethernet |
As required |
File Transfer |
Default User Name / Password (Send) |
As required |
File Transfer |
Scanner Resend Interval Time |
As required |
File Transfer |
Number of Scanner Resends |
As required |
In [Effective Protocol], check that the protocol you want to use is set to [Active].
