Skip header
 

Specifications for the Main Unit

This section describes specifications for the main unit.

Configuration:

Desktop

Photosensitivity type:

OPC drum

Original scanning:

One-dimensional solid scanning system through CCD

Copy process:

Dry electrostatic transfer system

Development:

Dry two-component magnetic brush development system

Fusing:

Heating roll pressure system

Resolution:

  • Scanning originals: 600 dpi

  • Printing: 600 dpi

Exposure glass:

Stationary original exposure type

Original reference position:

Rear left corner

Warm-up time (20°C, rated voltage):

  • From the main power switch: 30 seconds or less

  • From the operation switch: 10 seconds or less

Originals:

Sheet/book/objects

Maximum original size:

A4Landscape, 81/2 × 14Landscape

Paper size:

  • Paper tray: A4Landscape, A5Portrait, B5 JISLandscape, 81/2 × 11Landscape, 51/2 × 81/2Portrait, 16K (195 × 267 mm)Landscape

  • Bypass tray: A4Landscape, A5PortraitLandscape, B5 JISLandscape, 81/2 × 14Landscape, 81/2 × 11Landscape, 51/2 × 81/2PortraitLandscape, 71/4 × 101/2Landscape, 8 × 13Landscape, 81/2 × 13Landscape, 81/4 × 13Landscape, 81/4 × 14Landscape, 16K (195 × 267 mm)Landscape, 41/8 × 91/2Landscape, 37/8 × 71/2Landscape, C5 EnvLandscape, C6 EnvLandscape, DL EnvLandscape

  • Bypass tray (custom size):

    Vertical: 90.0 - 216.0 mm, 3.55 - 8.50 inches

    Horizontal: 139.0 - 600.0 mm, 5.48 - 23.62 inches

  • Duplex unit: A4Landscape, B5 JISLandscape, 81/2 × 14Landscape*, 81/2 × 11Landscape, 81/2 × 13Landscape*, 81/4 × 14Landscape*, 81/4 × 13Landscape*, 16K (195 × 267 mm)Landscape

    * Paper tray unit (Tray 2 and Tray 3) is required.

Paper weight:

  • Paper tray (Standard size): 60.0 - 90.0 g/m2, 16 lb. - 24 lb.

  • Bypass tray: 60.0 - 157.0 g/m2, 16 lb. - 42 lb.

  • Duplex unit: 64.0 - 90.0 g/m2, 17 lb. - 24 lb.

Non-reproduction area (Copier):

  • Leading edge: 1.0 - 5.0 mm, 0.04 - 0.20 inches

  • Trailing edge: 1.0 - 5.0 mm, 0.04 - 0.20 inches (Back of duplex copy: 2.2 - 6.2 mm, 0.09 - 0.25 inches)

  • Left edge: 0.5 - 3.5 mm, 0.02 - 0.14 inches

  • Right edge: 1.0 - 4.5 mm, 0.02 - 0.18 inches

First copy/print time:

7.5 seconds or less

(A4Landscape, 81/2 × 11Landscape, 100% reproduction, feeding from Tray 1, on the exposure glass)

Copying speed:

20 copies/minute (A4Landscape, 81/2×11Landscape)

Reproduction ratio:

Preset reproduction ratios:

  • Enlargement

    Metric version

    Inch version

    200%

    155%

    141%

    129%

  • Full size

    Metric version

    Inch version

    100%

    100%

  • Reduction

    Metric version

    Inch version

    93%

    93%

    71%

    78%

    50%

    65%

Zoom: From 50 to 200% in increments of 1%

Maximum continuous copy run:

99 sheets

Paper capacity (80 g/m2, 20 lb.):

  • Tray1: 250 sheets

  • Bypass tray: 100 sheets

Power Source:

220 - 240 V, 50/60 Hz, 4 A or more

Please be sure to connect the power cord to a power source as above. For details about power source, see “Power Connection”.

Power consumption:

  • Warm-up: Less than 930 W

  • Stand-by: About 85 W

  • During printing: About 410 W

  • Maximum: less than 930 W

  • The complete system consists of the main unit with full items installed.

Dimensions (W × D × H up to exposure glass):

485 × 450 × 371 mm, 19.1 × 17.8 × 14.7 inches

Space for main unit (W × D):

595 × 450 mm, 23.5 × 17.8 inches (including the bypass tray)

Noise emission:

  • Sound power level:


    Main unit only

    Complete system

    Stand-by

    40.0 dB (A)

    40.0 dB (A)

    Copying

    63.0 dB (A)

    67.0 dB (A)

  • Sound pressure level:


    Main unit only

    Complete system

    Stand-by

    34.0 dB (A)

    34.0 dB (A)

    Copying

    57.0 dB (A)

    61.0 dB (A)

    • Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.

    • Sound power level and sound pressure level are measured from the position of the bystander.

    • The complete system consists of the main unit with full items installed.

Weight:

29 kg (64.0 lb.) or less