Skip header
 

Orientation-Fixed Paper or Two-Sided Paper

This section describes loading paper that has a specified orientation and printing side (such as letterhead paper).

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the originals and paper are placed. Set [Letterhead Setting] to [On] under [Copier Features], and then place the original and paper as shown below. For details about Letterhead Setting, see “Copier Features”, Copy Reference. For details about printing with the printer function, see “Printer Features”, Printer Reference.

Original Orientation

Exposure glass

ADF

Illustration of original orientation

*1

  • Copier *2

    Illustration of original orientation

  • Scanner

    Illustration of original orientation

Illustration of original orientation

*1

Illustration of original orientation

*1 When making copies using the duplex function in this orientation by setting [Always Specify] for [Orientation] with [Copier Features] in User Tools, specify Operation panel screen illustration for the original orientation.

*2 When making copies using the duplex function in this orientation, and loaded paper orientation is Landscape, place originals as shown below.

Illustration of original orientation

Under [Copier Features], if [Orientation] is set to [Always Specify], load paper in Operation panel screen illustration orientation.

Paper Orientation

Illustration of paper orientation

Illustration of paper orientation

Note

  • In [Tray Paper Settings] under [System Settings], specify [Letterhead] for “Paper Type” of the paper tray you want to use. This setting is only available when the printer/scanner and fax units are installed. See “Tray Paper Settings”, Network and System Settings Guide.