Skip header
 

Regular sizes

When placing regular size originals on the exposure glass or in the ADF, specify the size of the originals from the regular sizes shown on the display.

If you do not specify the original size, the machine will make copies on the paper size in the tray selected. When copy paper size and original size differ, you need to specify the original size as follows:

1Select the paper tray using [Up arrow key] or [Down arrow key].

Operation panel screen illustration

2Press the [Sharp] key.

3Select [Regular Size] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

Operation panel screen illustration

4Select the original size using the scroll keys, and then press the [OK] key.

Operation panel screen illustration

The “Programmed” message appears.

When the regular size originals settings are registered, Operation panel screen illustration appears on the top of the copy display.

Operation panel screen illustration

Note

  • To cancel the size you have set, press the [Clear Modes] key.