Network Status
Item |
Description |
|---|---|
Link Status |
Shows the type and speed of the network connection. |
IPP Printer Name |
Shows the name used to identify the machine on the network. |
Network Version |
Shows the version of the machine's network module (a part of the machine firmware). |
MAC Address |
Shows the MAC address of the machine. |
Item |
Description |
|---|---|
DHCP |
Select whether the machine should receive a dynamic IP address automatically using DHCP. To use DHCP, select [Enable]. When enabled, the items below cannot be configured. |
IP Address |
Enter the IP address for the machine. |
Subnet Mask |
Enter the subnet mask of the network. |
Gateway |
Enter the IP address of the network gateway. |
Item |
Description |
|---|---|
Status |
Shows whether the NetBIOS protocol is active. |
Computer Name |
Enter the display name for the machine on the NetBIOS network. Can contain up to 15 characters. |
Workgroup Name |
Enter the workgroup to which the machine will belong. Can contain up to 15 characters. |
