Skip header
 

Top Page > Configuring the Machine Using the Control Panel > PDL Settings > Changing PDL Settings

Changing PDL Settings

The procedure for changing the setting for duplex printing is described as an example.

1Press any menu key.

image

2Press the [Up arrow key][Down arrow key] keys to select [PDL Settings], and then press the [OK] key.

Menu            
PDL Settings   

3Press the [Up arrow key][Down arrow key] keys to select [System], and then press the [OK] key.

PDL Settings   
System          

4Press the [Up arrow key][Down arrow key] keys to select [Duplex], and then press the [OK] key.

System          
Duplex          

5Press the [Up arrow key][Down arrow key] keys to select [Off], [Long Edge Bind], or [Short Edge Bind], and then press the [OK] key.

Duplex          
          Off *

The new setting is displayed with an “*” symbol, indicating that the setting has been changed.

6Confirm the current setting, and then press the [image] key.

7Press the [Clear/Stop] key to return to the initial screen.

Note

  • Setting items preceded by numbers can be selected by pressing the corresponding number key, instead of using the [Up arrow key][Down arrow key] key.

  • You can press the [image] key to exit to the previous level of the menu tree.