This section describes how to select the transmission mode.
There are two transmission modes: Memory Transmission and Immediate Transmission.
Memory Transmission
In this mode, the machine scans several originals into memory and sends them all at once. This is convenient when you are in a hurry and want to take the document away from the machine. In this mode, you can send a fax to multiple destinations.
Immediate Transmission
In this mode, the machine scans the original and faxes it simultaneously, without storing it in memory. This is convenient when you want to send an original quickly. In this mode, you can only specify one destination.
Press any menu key.
Press the [][] keys to select [Fax Settings], and then press the [OK] key.
Press the [][] keys to select [TX Settings], and then press the [OK] key.
Press the [][] keys to select [Immediate TX], and then press the [OK] key.
Press the [][] keys to select [Off], [On], or [Next Fax Only], and then press the [OK] key.
For Memory Transmission, select [Off].
For Immediate Transmission, select [On] or [Next Fax Only].
The new setting is displayed with an "*" symbol, indicating that the setting has been changed.
Confirm the setting, and then press the [] key.
Press the [Clear/Stop] key to return to the initial screen.
You can press the [] key to exit to the previous level of the menu tree.