Skip header
 

Top Page > Using the Fax Function > The Screen in Fax Mode

The Screen in Fax Mode

This section provides information about the screen in fax mode.

Important

  • The fax function is only available for the Type 2 and Type 3 models.

By default, the display shows the copier screen when the machine is turned on.

If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to switch to the fax screen.

Screen in standby mode

Ready      31-07
Standard   23:30

  • First line:

    Shows the current status of the machine and current month and date.

  • Second line:

    Shows the current resolution setting and current time.

Note

  • The machine's default mode at power on can be specified in the [Default Mode] setting under [Admin Settings].

  • The display format for time and date can be specified in [Date/Time Setup] under [Admin Settings].

Reference