Skip header
 

Top Page > Using the Copier Function > Copying Multiple Pages onto One Sheet

Copying Multiple Pages onto One Sheet

This section describes how to copy multiple pages of an original onto a single sheet of copied paper for the current job.

Important

  • This function is only available when the original is set in the ADF, not when it is set on the exposure glass.

  • To use this function, the paper tray specified for photocopying must contain A4, Letter, or Legal size paper.

2-in-1 mode

You can copy two pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:

  • Portrait

    image

  • Landscape

    image

Scaling is preset according to the printout paper size: 71% for A4 size, 65% for Letter size, and 60% for Legal size.

4-in-1 mode

You can copy four pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:

  • Portrait Row

    image

  • Portrait Column

    image

  • Landscape Row

    image

  • Landscape Column

    image

Scaling is preset to 50%, regardless of the printout paper size.

Copying multiple pages onto one sheet

Use this procedure to copy multiple pages onto a single sheet.

1Press the [Reduce/Enlarge] key.

image

2Press the [Reduce/Enlarge] key or [Up arrow key][Down arrow key] keys to select [2in1] or [4in1], and then press the [OK] key.

3Press the [Up arrow key][Down arrow key] keys to select the desired printout format, and then press the [OK] key.

  • If [2in1] has been selected, select [Portrait] or [Landscape].

  • If [4in1] has been selected, select [Portrait Row], [Portrait Column], [Landscape Row], or [Landscape Column].

Note

  • Use the following keys to cancel settings:

    • [image]: Cancels the changes made to settings and returns the display to the previous screen.

    • [Clear/Stop]: Cancels the changes made to settings and returns the display to the initial screen.

  • You can change the [Reduce/Enlarge] setting under [Copy Settings] to always make photocopies in 2-in-1 or 4-in-1 mode.

  • Temporary job settings are cleared in the following cases:

    • When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.

    • When the [Clear/Stop] key is pressed while the initial screen is displayed.

    • When the machine's mode is changed.

    • When the power is turned off.

    • When the machine's default for the same setting is changed.

Reference