Skip header
 

Basic Operation in Printer Mode

The following procedure explains how to perform basic printing.

1Open the printer properties dialog box in your document's application.

2Set printing options as necessary, and then click [OK].

The printer properties dialog box closes.

3Click [OK].

Note

  • If you are using the Type 3 model with tray 2 installed, you can select tray 1 or 2 as the priority tray using the [Tray Priority] setting under [PDL Settings].

  • The priority tray setting is not available for the Type 1 and Type 2 models.

  • If a paper jam occurs, printing stops after the current page has been printed out. After the jammed paper is removed, printing restarts from the jammed page automatically.

Reference