



	Manuals Contents Previous Next

Top Page > Facsimile Reference > Transmission > Placing Originals > Paper Size and Scanned Area > When placing an original into the ADF

When placing an original into the ADF

This section explains how to place an original into the ADF.

Maximum scan area
The following shows the maximum scan area:
Memory Transmission: 297 × 1200 mm/11 × 47 inches (W × L)
Immediate Transmission: 297 × 1200 mm/11 × 47 inches (W × L)

The machine detects paper sizes in the following ways:

Metric Version
		Length
		-242 mm	242-291 mm	291-318 mm	318 mm-
Width	-191.5 mm	A5	B5 JIS	B5 JIS	B5 JIS
	191.5-230 mm	A5	8¹/₂ × 11	A4	8¹/₂ × 13
	230-263.5 mm	B5 JIS	B4 JIS	B4 JIS	B4 JIS
	263.5-288 mm	8¹/₂ × 11	11 × 17	11 × 17	11 × 17
	288 mm-	A4	A3	A3	A3

Inch Version
		Length
		-9.5 inches	9.5-11.5 inches	11.5-12.5 inches	12.5 inches-
Width	-7.5 inches	5¹/₂ × 8¹/₂	7¹/₄ × 10¹/₂	7¹/₄ × 10¹/₂	7¹/₄ × 10¹/₂
	7.5-9.1 inches	5¹/₂ × 8¹/₂	8¹/₂ × 11	A4	8¹/₂ × 14
	9.1-10.4 inches	10 × 14	10 × 14	10 × 14	10 × 14
	10.4-11.3 inches	8¹/₂ × 11	11 × 17	11 × 17	11 × 17
	11.3 inches-	A4	A3	A3	A3

During Immediate Transmission, the length of the scanning range can decrease to less than 1200 mm (47 inches), depending on the resolution of the image and the configuration of the receiving machine.