Skip header
 

Top Page > Software Guide > Other Print Operations > Printing with the Finisher > Staple > Staple position

Staple position

The specified staple position varies depending on paper size, type, quantity and feed orientation. The following table shows staple positions:

Staple Position

Illustration of staple position

Staple Capacity (Finisher SR790)

Paper Size

Staple Capacity

A3Landscape, B4 JISimage, 12" × 18"image, 11" × 17"image, 81/2" × 14" (Legal)image, 81/2" × 13" (Foolscap)image, 81/4" × 13" (Folio)image, 8" × 13" (F/GL)image

30

A4imageimage, B5 JISimageimage, 81/2" × 11" (Letter)imageimage, 71/4" × 101/2" (Executive)imageimage

50

Staple Capacity (Finisher SR3030)

Paper Size

Staple Capacity

A3image, B4 JISimage, 12" × 18"image, 11×17image, 81/2" × 14" (Legal)image, 81/2" × 13" (Foolscap)image, 81/4" × 13" (Folio)image, 8" × 13" (F/GL)image

30

A4imageimage, B5 JISimageimage, 81/2" × 11" (Letter)imageimage, 71/4" × 101/2" (Executive)imageimage

50

Mixed Size (Finisher SR3030)

Mixed Paper Size

Staple Capacity

A3image and A4image

30

B4 JISimage and B5 JISimage

30

11" × 17"image and 81/2" × 11" (Letter)image

30

Note

  • When two-sided printing is selected, adjust the staple position to the binding direction.

  • If you are punching at the same time, specify the same side.

  • For printing methods, see the printer driver Help.