



	Contents Previous Next

Top Page > Using the Copy Function > Setting and Placing Originals > Placing Originals > Placing Originals on the Exposure Glass

Placing Originals on the Exposure Glass

Place originals on the exposure glass.

Be careful when placing thin originals on the exposure glass, because the edges of thin originals can slip underneath the scale.

Lift the exposure glass cover.
Place the original face down on the exposure glass. The original should be aligned to the rear left corner.
Start with the first page to be copied.
1. Positioning mark
2. Left scale
Lower the exposure glass cover.

Straighten curls in the originals before placing them on the exposure glass.
Do not load badly curled originals.
Load the original squarely.