Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ContentsPreviousNext | | |
Use [POP3 Settings] to make settings for receiving e-mail.
To use this function, the network interface board must be installed.
POP3 Server Name
The specified POP3 server name is used for [POP before SMTP].
If DNS is in use, enter the host name. If DNS is not in use, enter the POP3 or server IP address.
Enter [POP3 Server Name] using up to 64 alphanumeric characters. Spaces cannot be entered.
POP3 Port No.
The specified POP3 port number is used for [POP before SMTP].
Enter a port number between 1 and 65535 using the number keys.
POP3 Svr Timeout
Specify the time to wait for a response from the POP3 server before disconnecting the line.
POP3 User Name
Enter an e-mail address using up to 64 characters.
POP3 Password
Enter a password using up to 32 characters.
 |
 | Copyright (C) 2006, 2007 All rights reserved. |
