



	Contents Previous Next

Top Page > Read This First > Managing This Machine > Using This Machine as a Scanner > Sending files by FTP

Sending files by FTP

Use the following procedure to configure the machine for use as a scanner, so users can send scan files over the network to FTP server folders.

To use this function, the network interface board must be installed.

Connect the machine to the network.
Specify the network settings, such as the machine's IP address and the gateway address.
Begin using the scanner.

For details about procedures and settings in step 1, see “Installing the Printer Driver (Network Interface Board)”, Quick Installation Guide.
For details about procedures and settings in step 2, see Network Settings.
For details about procedures and settings in step 3, see Sending Scan Files by FTP.