Faxing Using the External Telephone (Manual Transmission)
Pick up the handset of the external telephone and dial. When the line is connected and you hear a high-pitched tone, press the [B&W Start] key to send your fax document. If you hear a voice at the other end, speak as normal.
This function is available in immediate transmission mode only.
This function is not available for Internet Fax.
Press the [Memory Trans.] key.
Make sure the [Memory Trans.] indicator is unlit.
Place the original.
| 16:00 Std 100% -Set Orig- Fax Only |
To change the scan settings, press the [Resolution] key, and then specify the settings.
Pick up the handset of the external telephone.
| *Using Handset...* |
You will hear a dial tone.
Specify the destination.
  = |
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
When the line is connected and you hear a high-pitched tone, press the [B&W Start] key to send your fax document.
If you hear a voice, tell the receiver that you want to send them a fax document (ask them to switch to facsimile mode).
The transmission starts.
Replace the handset.
After transmission, the initial screen appears.
To cancel a transmission, press the [Clear/Stop] key, and then remove the originals.
If you pick up the handset of the external telephone while the machine is in on hook dial mode, the machine's speaker switches off and you can use the external telephone.
