Setting the Reception Mode
The following procedure explains how to set the fax reception mode.
Press the [Menu] key.
Press the [
] or [
] key to display [RX Settings], and then press the [Yes] key.
| RX Settings OK=Yes / or 1-9 |
Press the [] or [] key to display [RX Mode], and then press the [Yes] key.
| 5 RX Mode OK=Yes |
Press the [
] or [
] key to select the reception mode setting you want to apply, and then press the [Yes] key.
To move the *icon, press the [] or [] key.
| * Fax Only AutoSW , & Yes |
The reception mode setting appears.
Press the [No] key to switch to the initial screen.
The default setting is “Fax Only”.
