Using Device Setting Utility
Use Device Setting Utility, to register or change Quick Dial, Speed Dial, or Group Dial destinations, and to change the machine's settings.
To use Device Setting Utility, the machine must be connected to the client computer via USB connection.
To use Device Setting Utility, you must install the TWAIN driver, which is on the supplied CD-ROM.
The Device Setting Utility cannot be installed under Windows NT 4.0.
Before using the Device Setting Utility, install the Device Setting Utility from the provided “Drivers, Manual & Utilities” CD-ROM.
What you can do using Device Setting Utility
Register, change, or print Quick Dial destinations.
Register, change, or print Speed Dial destinations.
Register, change, or print Group Dial destinations.
Show the total counter.
Display the options installed on the machine.
Display and change the following settings:
System Settings
Tray Paper Setting
User Restriction
Copier Features
TX Settings
RX Settings
Line Settings
Prnt List/Report
Network Settings
LDAP Settings
POP3 Settings
SMTP Settings
Scanner Features
If the optional Network Interface Board GX4 is not installed, you cannot make settings under [Scanner Features], [SMTP Settings], and [POP3 Settings].
