Using the SmartDeviceMonitor for Client
SmartDeviceMonitor for Client is an application that has functions such as the peer-to-peer printing machine monitoring. We recommend you install this application on the client computer. SmartDeviceMonitor for Client is required if you need to print over a network in a Windows 98/Me environment.
To use this function under GX 3000SF, the optional network interface board must be installed
Operating System: Windows 98/Me
Protocol Stack
TCP/IP protocol supplied with Windows 98/Me
NetBEUI protocol supplied with Windows 98/Me
Operating System: Windows 2000
Protocol Stack
TCP/IP protocol supplied with Windows 2000
NetBEUI protocol supplied with Windows 2000
Operating System: Windows Server 2003
Protocol Stack
TCP/IP protocol supplied with Windows Server 2003
Operating System: Windows XP
Protocol Stack
TCP/IP protocol supplied with Windows XP
Operating System: Windows NT 4.0
Protocol Stack
TCP/IP protocol supplied with Windows NT 4.0
NetBEUI protocol supplied with Windows NT 4.0
What can you do with it?
Using SmartDeviceMonitor for Client, you can do the following:
Peer-to-peer printing
Send print jobs directly to the network printer without going through a print server.
Print using a substitute printer if there are too many jobs waiting on the specified printer, or if an error disables printing (Recovery Printing).
Allocate multiple print jobs to multiple printers (Parallel Printing).
Preregister groups of printers specified for Recovery Printing or Parallel Printing.
Receive error message notification if an error occurs in the machine while it is printing or sending a job.
Monitoring function
Check the machine status such as the remaining amount of paper while printing.
Simultaneously monitor multiple machines in use.
Check the machine's network settings and system configuration.
Be notified of print completion.
View up to 100 print jobs that belong to you.
