Skip header
For screen readerStandard Web browser page
 

Top Page > Using the Facsimile Function > Useful Reception Functions > Receiving Secure Faxes by Polling Reception

Receiving Secure Faxes by Polling Reception

This section explains how to use polling reception to receive faxes that are protected by SEP Code (sub-address and password).

You can use this function together with [Send Later].

  1. Press the [Fax Options] key.

    panel keys illustration

  2. Press the [Up arrow key] or [Down arrow key] key to display [4 Polling RX], and then press the [Yes] key.

    4 Polling RX       Up arrow key
     OK=Yes            Down arrow key

  3. Specify the destination, and then press the [Down arrow key] key.

    No.001=0987654      
     OK=Yes  (Subads.=Down arrow key)

  4. Enter the sub address specified by the sender, and then press the [Yes] key.

    Subaddress=         
     OK=Yes             

    You can enter the sub-address using up to 20 digits.

  5. Enter the password specified by the sender, and then press the [Yes] key.

    Password=           
     OK=Yes             

    You can enter the password using up to 20 digits.

  6. Press the [B&W Start] key.

    panel keys illustration

  7. Press the [B&W Start] key.

    The polling reception starts.

Note

  • The receiver incurs call charges for polling reception.

  • Make sure the number of digits in the SEP Code matches the specification of the machine from which you are receiving.

Reference